Total stations

Leica X-PAD allows to connect and operate total stations, manual or robotic.

In this chapter are explained the dedicated functions to manage total stations connected to the software.

To work with a total station, the current instrument profile must be a total station.

This chapter covers the following topics:

• TPS Basic application: learn how to use the TPS Basic application to perform simple measurements.

• Mechanical total station control panel: learn how to access and use the control panel functions when operating a mechanical total station.

• Robotic total station control panel: learn how to access and use the control panel functions when operating a robotic total station.

• Working with a robotic total station: learn the basic workflow for operating a robotic total station in the field.

• The electronic level: learn how to use the electronic level to accurately level the instrument and monitor station setup conditions before starting measurements.

• Station setup: learn how to setup a station using the available setup methods.

• Station setup tools: learn how to use the tools available in the station setup.

• Atmospheric coefficients: learn how to configure atmospheric parameters and correction coefficients to ensure accurate distance measurements.

• Measure mode and target: learn how to configure measurement modes and create and manage targets.

• Pole e-bubble with total station: learn how to enable and use the pole electronic bubble to verify pole verticality during total station operations.

• : learn how to perform field calibration procedures for compatible total stations to maintain measurement accuracy.

• Data streaming from robotic total station: learn how to configure and start coordinate data streaming to external devices and applications.