-
This chapter explains the specific commands and functionalities when surveying with GNSS receivers. The different operative modes are explained.
The commands for measuring points are available when the GNSS receiver is in rover mode.
For common operations when working with a GNSS or a total station refer to Survey points.
-
This chapter covers the following topics:
-
GNSS Survey interface: explanation of panels and commands of the GNSS survey graphic interface.
-
Measure of a GNSS point: learn how to measure and store a topographic point.
-
Recording of raw data during the survey: learn how to record the raw data during the survey for kinematic or stop&go processing.
-
GNSS measure mode: learn how to utilize the different measure modes with a GNSS receiver, including hidden points and other measure mode methods.
-
Automatic GNSS survey of point: learn how to measure automatically points according to the selected rule.
-
Static survey of points: learn how to perform a static survey recording the raw data.
-
Advanced average and analysis: learn how to use the function to measure repeatedly re-initializing the ambiguity calculation and analyzing the results.
-
Survey with cable locators: learn how to work with cable locators and GNSS receiver.
-