-
This chapter explains specific commands when stakeout with total station. Different operative modes are explained.
-
For common operations when working with a GNSS or a total station refer to Stakeout.
Before proceeding with stakeout and GNSS receiver, it is necessary to define the coordinate system of the job in order to guarantee the correct matching between surveyed positions and positions to stakeout. If no coordinates system is set, only positions defined in WGS84 coordinates can be staked out.
-
This chapter covers the following topics:
-
GNSS Survey interface: explanation of panels and commands of the GNSS stakeout graphic interface.
-
Stakeout reference for GNSS receivers: learn how to change the stakeout reference when working with GNSS receiver.
-
Stakeout view mode for GNSS receivers: learn how to change the stakeout view mode when working with GNSS receiver.
-
Step-by-step stakeout with GNSS receiver: learn the basic steps to stakeout objects with a GNSS receiver.
-