Instruments settings

The Instruments settings page is used to:

1. Set the connection between the instrument and a device .

2. Define parameters for the operation between the instrument and a device.

All parameters of connection and operation are organised in profiles. A profile has the connection mode of the instrument and all related operation parameters.

For the same instrument, different profiles with different operation parameters can be created and recalled.

Among all profiles available only one is the current profile. The current profile is used during the use of the software.

The instruments page: an overview to the instrument page with the list of instrument profiles.

Create a GNSS receiver profile: step-by-step procedure on how to create a profile for a GNSS receiver.

Create a total station profile: step-by-step procedure on how to create a profile for a total station.

Create a laser distance meter profile: step-by-step procedure on how to create a profile for a laser distance meter.

Create a profile for echo sounder: step-by-step procedure on how to create a profile for an echo sounder to be used with Bathimetry module.

Creating a cable detector profile: step-by-step procedure on how to create a profile for a cable detector to be used with Locator module.